2.7.10 — 2018-10-25
Hotfix release.
FIXED No destructive time stretch controls on controller screens
FIXED KOMPLETE KONTROL S-Series MK2 LEDs would blink when controlling Logic Pro X
FIXED Crash at startup on some systems when system output device name has Japanese characters
FIXED Tapping unselected pads while Prehear is on would select the pads

2.7.9 — 2018-10-22
ADDED Support for KOMPLETE KONTROL A-Series hardware
ADDED MASCHINE MIKRO MK3 Focus parameter through software
ADDED MASCHINE MIKRO MK3 MIDI Mode
To enable, hold SHIFT and press the MASCHINE button in the upper-left corner of the MASCHINE MIKRO MK3.
ADDED Edit Tab to Audio plug-in
Like the Sampler plug-in, you can now perform destructive audio edits to loops loaded into the Audio plug-in via the new Edit tab.
ADDED Usable Play Range for Audio plug-in
In the Edit tab of the Audio plug-in, there are now Playable Range Start and End markers which can be used to isolate only a portion of the loaded audio file that you wish to loop. The timeline along the top of the waveform now shows musical units rather than samples.
IMPROVED Items can now be dragged from the Browser to external locations
For example, it is now possible to drag and drop a sample from the Samples tab or a Preset from the Instruments tab of the Browser to the desktop of your computer or other instruments.
FIXED Audio plug-in waveforms on the hardware Pattern screens didn't update when changing the Pattern Length
FIXED Edit tools could appear in the Sampler plug-in even with no sample loaded
FIXED When the Section page was pinned on MASCHINE MK3 or STUDIO, pressing and releasing DUPLICATE would incorrectly recall the Scene page

Maschine 2 v.2.7.8 (R540)
2.7.8 — 2018-09-11
ADDED Support for KOMPLETE KONTROL S88 MK2
ADDED Support for the new MASCHINE MIKRO MK3 Hardware
IMPROVED WASAPI performance in Windows 10
FIXED WASAPI playback wouldn't work on Surface One with internal speakers
FIXED Incorrect Font Size on wavedisplay in software UI
FIXED Potential crash in Audio plug-in when using high sample rates
KNOWN ISSUE When using the MASCHINE MIKRO MK3 in Step mode, it is not possible to enter steps if the browser results list is being displayed on the screen

Maschine 2 v.2.7.7 (R502)
2.7.7 — 2018-07-25
ADDED Previews for Group Kits and Sounds
All Kits and Sounds in the MASCHINE Factory Library now have previews. In order to make them work, you will need to update your Factory Library to version 1.3.2 or newer via NATIVE ACCESS.
ADDED "Formant" engine to Audio plug-in
When transposing the pitch of a loop in the Audio plug-in, the new "Formant" mode will attempt to preserve the formants which can help keep vocals sounding natural. It can help prevent the cartoonish sounds that can occur when transposing up or down.
IMPROVED Audio plug-in Loop recording workflow
The Audio plug-in now stops any previous Take it was playing when recording to a new Take or new Pattern. This prevents hearing the previous Take playing back while trying to record the new Take.
IMPROVED Tempo embedded in Audio recordings
MASCHINE now writes both the Tempo and Loop tags to recordings made with Loop mode. Tempo is written into recordings made in Sync mode. These recordings will therefore always be in sync with the project when loading them into an Audio plug-in.
IMPROVED Bouncing and Exporting of Audio
When you drag a bounced audio file from the Pattern Editor dragger to a Sound Slot or Group, MASCHINE will now load this into an Audio plug-in instead of a Sampler. Additionally, when Bouncing or Exporting loop content from MASCHINE, the Loop tag and Project Tempo will now be written into the files. MASCHINE will read this tempo when later loading this file into the Audio plug-in.
CHANGED Pattern Editor workflows
The number of tools available in the software for editing the Patterns has been reduced due to redundant functionality. Instead of an arrow, a pencil, and an eraser, there is now just a pencil tool which can be toggled on and off. When the pencil is off, the mouse will behave as it did when using the arrow tool (and the mouse will look like a normal arrow in this mode). When the pencil is on, this enables the same pencil/paint functionality as before (and the mouse will look like a pencil when in this mode).
IMPROVED Pattern Editor Keycommands
W = toggle between "Group View" and "Keyboard View"
S = toggle "Sampling View" on/off
E = toggle "Pencil/Paint" on/off
IMPROVED Count-in Recording
Can now engage count-in recording from the software while the playhead is moving via Command + Shift + Space (Mac) or Ctrl + Shift + Space (Windows).
IMPROVED The "Always Use Latest Version of NI Plug-ins" preference now also applies to projects
If a project was saved using older versions of plug-ins, such as older versions of REAKTOR or KONTAKT, the newest installed versions will be used when loading the project while this preference enabled. If the preference is off, MASCHINE will attempt to load using the versions originally used when creating the project. Additionally, if only newer versions of the required plug-ins are installed on the system, the newer versions will be used even if this preference is turned off.
CHANGED MIDI Change and Scene/Section Retrigger locations
MIDI Change (where you assign MIDI messages for changing Scenes, Sections, and Locks) is now accessed through the Edit menu. Scene & Section Retrigger options are now found at the bottom of the the Perform Grid drop-down menu. The "gear" icon in the Global Header where these options used to be accessed has now been removed.
FIXED Cubase, and possibly some other hosts, could crash when unloading MASCHINE from a track or when quitting
FIXED Crash/hang when changing Audio Interface to ASIO and back to WASAPI
FIXED QuickBrowse is not working when pressing the magnifying glass button on the hardware
FIXED Audio might not play when switching between Loop mode and Gate mode if there are overlapping MIDI notes
FIXED Applying Randomizer disables Audio plug-in for the Pattern
FIXED Reverb isn't working at certain sample rates
FIXED Single Scene Export is slightly too long
FIXED Enabling/Disabling MIDI Ports via MK3 Settings page didn't take effect until opening and closing the Preferences in the software
FIXED One of two MASCHINE instances crashing when turning on a connected MASCHINE MK3
FIXED Resizing a selection of multiple notes would depend on speed of mouse movement
FIXED Displaying the Sampling area would create an undo step
FIXED Mouse could sometimes freeze when deleting automation lines via double-click
FIXED Automation handles would sometimes freeze when dragging with the select tool
FIXED Selected type tags would overlap with the "Types" label when collapsed
FIXED When copying note events via Alt + mouse drag, the currently selected note event could sometimes appear behind overlapping notes
FIXED Contrast setting in software preferences for Maschine MK2/Mikro MK2 controller was broken
FIXED Exported audio loops would sometimes be slightly too long
FIXED Audio plug-in would sometimes stop playing when switching between Loop and Gate mode during playback, especially if the Pattern contains overlapping notes
FIXED On MASCHINE MK2, the "Browse" screen would look incorrect when pressing "Shift"

2.7.5 — 2018-04-20
Hotfix release.
FIXED Re-pitch engine plays at the wrong speed when there is a sample rate mis-match between the Audio Interface and the audio file loaded in the Audio plug-in.

2.7.4 — 2018-04-18
ADDED “Target” parameter to the Loop recording mode of the Sampling Page
This parameter determines what should be done with a new recording when the recording is complete. “Take” simply adds the new recording to the Take list of the current plug-in, “Sound” puts the new recording into an Audio plug-in in the next unoccupied Sound Slot (useful for layering the recording with whatever else is in the current Pattern, like a guitar looper pedal), and “Pattern” puts the new recording into an Audio plug-in in the next unoccupied Sound Slot AND additionally creates a new Pattern where only this loop is being played (useful for capturing different versions of a part and quickly reviewing them by switching Patterns).
ADDED "Looper" workflow to MASCHINE JAM
This feature automates the use of the new Target parameter for fast sampling and layering. Holding the IN 1 button enables this new Loop Recording mode (it’s also helpful to pin this mode on by holding IN 1 and pressing the SONG button). While this new Loop Recording mode is active, pressing an existing Pattern will trigger a recording of a new loop which is then added as a new Sound in the existing Pattern; doing this repeatedly allows you to quickly layer recordings on top of each other. Alternatively, pressing an empty Pattern button will trigger a recording and will then place that recording in a new Sound Slot AND a new Pattern will be created where only the new loop is playing back. When pressing the IN 1 button, External Input 1 is selected as the source for the recording. Pressing GRP while in the Loop Recording mode will select the focused Group as the source. Pressing MST will select MASCHINE’s Master output as the source (for resampling what is currently playing).
ADDED Footswitch control of Sampling
When in the Sampling page or when the Loop Recording mode is enabled on MASCHINE JAM, a connected footswitch can be used to control recording. Pressing the footswitch will arm a recording according to the current settings. Pressing the footswitch again before recording has actually started will cancel the recording. If recording is in progress, pressing the footswitch once will stop the recording—double-pressing will abort the recording (any recorded audio to that point will be discarded). If the recording is complete, holding the footswitch down for a few moments will trigger Undo so you can try another take.
IMPROVED Automatic tempo detection of the Audio plug-in
The algorithm now chooses a tempo that’s closest to your current project tempo. For example, if your project tempo is 170 BPM and you load a loop which should be 174 BPM, MASCHINE will now set the Source Tempo as 174 BPM instead of 87 BPM as it did previously.
ADDED “Re-pitch” engine mode to the Audio plug-in
This engine simply retunes/repitches the loop (like speeding up or slowing down a record) to make it conform to the Project tempo. This mode requires significantly less CPU power than the default mode, but you will not be able to retune the loop at all (any pitches programmed in Gate mode will be ignored—only the timing of the programmed notes will be used to gate the playing audio).
ADDED Ableton Live DAW Integration for MASCHINE MK3
Mixer and basic DAW Control. Access Ableton Live Mixer via MASCHINE MK3 hardware: Volume, Pan, Mute / Solo / Arm states are visible on screens. Also access essential controls: Play / Stop / Record / Session record, Clip Navigation, Launch & Record, Quantize, Undo / Redo, Automation Toggle, Tap Tempo, and Loop Toggle.
IMPROVED Recorded Takes are now saved and recalled as part of the Project
ADDED Automatic external audio recording latency compensation
This compensation will be in effect when recording from an External Input and with the Monitoring parameter turned Off. The system currently works based upon the overall latency reported by the selected audio interface.
REMOVED Right-click removal of Events in the Pattern Editor
In this version, the normal context menu is now opened on right-click. Events can still be deleted using a double-click as well as using the "Paint" and "Erase" tools.
CHANGED Right-click behavior in the Arranger
In this version, right-click no longer removes Patterns from Scenes. It now opens a context menu with many useful options for arranging.
IMPROVED Behavior and cursor icons for resizing Events in the Pattern Editor
The active area for resizing Events is also increased.
FIXED Prelisten controls would disappear on the Samples tab of the User Library
FIXED It wasn’t possible to Quick Edit notes on the MASCHINE JAM
FIXED Recording Settings would remain disabled if you cancel the recording during the waiting period before recording actually starts
FIXED The BPM and Swing values in the header would not update their values when loading a new Project
FIXED Duplicate would actually duplicate note events even if none were selected

2.7.3 - 2018-03-27
Аудио улучшения программного расширения.
ДОБАВЛЕНА возможность включать и отключить Аудио аудио плугины патерна в режиме LOOP. Двойной клик по форме волны выполнит воспроизведение Pattern-а. Альтернативно, Loops могут быть включены или отключены через страницу STEP на контроллере.
ДОБАВЛЕН режим записи LOOPS во вкладке Record, и вкладка Record теперь доступна в Sampler и во вкладке Audio plug-ins. Выбирая создание нового LOOPS, начало записи будет квантоваться к началу Pattern. Кроме того, при завершении записи, петля будет автоматически загружена в Audio plug-ins и немедленно начнет воспроизведение
Улучшения MASCHINE MK3.
ДОБАВЛЕННО представление идей (Ideas View) в MASCHINE MK3 и STUDIO MASCHINE.
ДОБАВЛЕННО Редактирование Событий (Event Editing) на MASCHINE MK3 с 4-Directional Encoder устройством. Выберите, nudge, pitch-shift и измените длину примечаний 4-Directional Encoder – а в окне событий (на экране аппаратного средства)
ДОБАВЛЕННАЯ Интеграция Apple Logic DAW для MASCHINE MK3 - Микшер и основной Контроль за DAW. Миксер Apple Logic DAW доступен через аппаратные средства MASCHINE MK3 (Volume, Pan, Mute / Solo видимы на экранах). Access Essential Controls: Play / Stop / Record, Quantize, Undo / Redo, Automation Toggle, Tap Tempo, и Loop Toggle.
Общая информация.
ИЗМЕНЕННИЯ. теперь можно сделать запись событий непосредственно на Странице СОБЫТИЙ (EVENTS Page) (MASCHINE MK3)
ДОБАВЛЕНО. дополнительные Scales от KOMPLETE KONTROL в MASCHINE
ДОБАВЛЕНА. Загрузка PerformFX в конце цепи Group plug-in.
УСТРАНЕНА проблема, которая ломала Pattern Duplicate на MASCHINE MIKRO
УСТРАНЕНА проблема, когда MASCHINE Transport Loop, влияла на воспроизведение Ideas View, при воспроизведении в DAW.
ЗАФИКСИРОВАН креш, который мог произойти, вовремя изменяя масштаба изображения горизонтально в Аранжировщике со специальными символами на имена Раздела
ФИКСИРОВАН висящий диспетчер, вовремя получения доступа к параметрам боковой цепи (страница Plug-ins)
Устраненные Проблемы переименования Сцен и Разделов
УДАЛЕННЫ 32-битные версии автономного приложения и plug-ins.
ДОБАВЛЕНЫ Velocity Curves в Controller Editor для MASCHINE MK3
УДАЛЕН модальный диалог при запуске, который предлагает загрузить звуковые файлы предварительного просмотра с родного Доступа. Файлы предварительного просмотра все еще доступны для установки в родном Доступе
ИЗМЕНЕН Clear Auto теперь удаляет События Автоматизации из Параметров Sampler а не Автоматизации центра
ИЗМЕНЕН KOMPLETE KONTROL MK2: Нажатие CLEAR также удаляет События Автоматизации (PATTERN page)

1. Зарегистрироваться на сайте native-instruments.com CREATE NEW ACCOUNT
2. СкачатьNative Access
3. Запустить Native Access, залогиниться.
4. Выйти.
5. Запустить инсталлятор приложения. Любого от NI

Новый DRUM SYNTH



Новое окно микшера



Новый PLUG-IN STRIP